Lightweight and compact makes the TK-360(N) the convenient and easy-handling answer for all requirements. Very compact, these units measure 58 (W) x 135 (H) 32 (D) mm and weigh a mere 400 g (with KNB-14 battery).
- The vertical layered design with the battery pack forming the entire back of the unit and the transceiver components forming the front, is a fresh approach that allows for a stronger chassis and a signal PCB while improving the overall styling of the radio.
- A large 44mm speaker provides 500 mW audio output. This enables the user to hear transmissions clearly even in the noisiest environments.
- 4 memory channels store frequency and configuration settings.
- Power output (high/low) can be set for each channel by your dealer. The TK-360(N) can be set for 4W/1W.
- Built-in QT and DQT signaling (encoder/decoder) segregates talk groups so users only hear calls from their own group.
- Built-in 2-tone decoder offers a 2-tone paging code assignable to any channel. An incoming message is signaled with audible and visible alerts.
- Signaling AND/OR logic works when using combinations of signaling systems. Squelch is opened when either one, or all, signal requirements are met.
- Busy channel lockout further improves channel management by preventing transmit if another talk group is already on the air.
- Time-out timer can be programmed for a continuous transmit limit.
- The battery power saver circuit automatically sets receiver sleep duration while monitoring carrier and tone status.
- Low battery alert causes the red TX LED to flash a warning when voltage drops below threshold.
- Monitor/volume set temporarily defeats signaling mode or pens up the squelch for a user volume setting reference.
- Heavy-duty antenna mount uses the industry-standard screw-mount connector for reliable mechanical and electrical performance.
- Military environmental standards MIL-STD 810 C/D/E covering rain, humidity, dust, vibration, & shock, so you're assured of reliable operation even under adverse conditions.
OPTIONAL ACCESSORIES
| Frequency range |
: 448 ~ 470 MHz |
| Number of channels | : 4 |
| Channel spacing | : 25 kHz / 12.5 kHz |
| Operating voltage | : 7.5V DV (20%) |
| Battery life (5-5-90 duty cycle with battery saver off) | |
| with KNB-14 (600mAh) | : More than 4 hours at 4W |
| with KNB-15A (1100mAh) | : More than 8 hours at 4W |
| Dimensions (W x H x D) | : 58 x 135 x 32 mm with KNB-14 battery |
| : 58 x 135 x 35 mm with KNB-15A battery | |
| Weight (net) | : 200g, main body only without antenna |
| : 400g with KNB-14 battery & antenna | |
| : 440g with KNB-15A battery & antenna | |
| RF power output (Hi/Low) | 4W / 1W |
PT4200S